K 500 S

Constructed completely out of cast iron, the new Felder 500 Series saw unit represents a new era of running stability and efficiency.
104 mm cutting height with a 315 mm saw blade
operates with dado tooling up to 20 mm
Zero point tilt
Oversized saw arbor with double bearing trunnions – Maximum motor power transfer with the Poly-V belt. The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. ­Combined this results in an almost 100% power transmission to the saw blade
Maximum energy transfer from the large Poly-V belt ­bearing area
Optimal extraction with a completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
High precision double-sided trunnion support system
Tilt segment “Easy-Glide”:
- High durability
- Play-free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect ­transmission of power to the saw blade.

The crosscut fence 1300 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position.
The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.
The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This keeps the stop firmly in place for both straight and
mitered cuts.

“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximising precision over the lifetime of the machine. A 3 way dust protection system ensures clean, dust free guide rails. This is obtained through silicon wipers, brushes and concave tracks. Your X-Roll sliding table guidance system is backed by a 6 year factory guarantee.
- Clean, dust-free gui­de rails thanks to special silicon wipers.
- Hardened-steel tracks ensure accuracy and durability.
- 6 year guarantee.

The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.

The single handed adjustment system ensures quick and accurate setting of the rip fence. A fine adjustment facility is included.
The rip capacity amounts to 800 mm or optionally
1250 mm. The easy to read rip scale is perfectly integrated into the saw table. The aluminium rip fence plate can be moved backwards to optimise the feed of workpieces.

For the professional processing of sheet material the saw can be equipped with the independently adjustable scoring unit.

The Felder 500 Series saw unit is fully compatible with Dado tooling. Thanks to a removable table insert and flanges, specialised Felder dado tooling can be used.