F 700 Z Power-Drive

The advantages of the Felder quick change spindle system: Quick and easy change of spindle sizes; ability to interchange between 25, 30, 40, 50 mm, ¾’’, 1’’ and 1 ¼’’ diameter spindles; facility to insert a high speed router spindle for router bits; automatic repetition of settings for production work.

With a completely new design, the Felder “700” spindle unit
sets new standards!
Spindle operating height of up to 115 mm
Table opening: 230 mm
Quick-change system for moulder spindle
4 Operating speeds (3500, 6500, 8000, 10,000 rpm)
Change of speed from front of machine
Fully compatible with high speed router spindle at 15,000 rpm
Rearward tilt 0° to 45°
Electronic height adjustment with LED display
High precision double-sided trunnion support system
Dovetail guidance system for height adjustment
Maximum energy transfer from the large Poly-V belt ­bearing area
Excellent vibration absorption from heavy cast iron unit
Tilt segment “Easy-Glide”:
- High durability
- Play-free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The high speed router spindle is designed for router shaft diameters of Ø 6–16 mm at a running speed of 15,000 rpm.

All Felder spindle moulders tilt 90°–45° as standard.

As soon as you begin working on your machine, you’ll see that your Felder’s range of applications is much wider than you might have expected and you save a lot on tools too. Using the hand wheel causes the whole moulder spindle unit to tilt to the requested angle easily and smoothly.

The dual dust extraction for the spindle function via the spindle fence and the chip collection bin under the cutterhead ensures clean and trouble free ­operation.

Accurate slots and tenons are much easier with the ­Felder “X-Roll” sliding table. This precision guiding system will accept maximum loads without compromising the smooth and accurate stroke of the sliding table. The “X”-configuration of the roller bearings optimally distributes workpiece weight to all sides. With conventional sliding tables, ball bearings are used in the guiding system. A ball bearing system creates a singular point of contact between the
bearings and the flat guiding tracks. The singular point of contact will eventually wear grooves into the tracks and as a result, sideways play will develop in the sliding table. It is physically impossible for the “X-Roll” system; with roller bearing lineal contact; to wear grooves into the guiding tracks, hence the
system will always remain play-free and is backed with a 6-year factory guarantee.

The “240“ spindle fence is standard equipment on the spindle moulders. The spindle fence can accommodate tooling to a maximum of 230 mm and has a fine adjustment on the spindle fence outfeed side. The integrated dust extraction connector allows for chip removal. The spindle table opening is 230 mm. That is your advantage when panel-raising ­­– the spindle tooling can be lowered under the table.

The MULTI-adjustment system allows quick adjustment of the moulder fencer. This time saving feature reduces setup time and the number of test cuts that are required. The whole fence can also be removed and then returned to its exact position.
- automatic repeat setting after removal of your fence
- parallel adjustments of the moulder fence
- quick and accurate adjustment
- measurement scale for depth of cut

More than 50 % of our clients now decide to take electric height adjustment for the moulder spindle.

To optimize cutting speed for each job an optional Variable Speed Control (1500 to 11,000rpm) is available.

The safety bar guides, great for “end-grain” work (optional).

Hardened anodised aluminium fence plates standard on the Professional range. Accurate fine adjustment on the removable spindle fence via a scale from
–10 to +35 mm.

The large table opening allows for maximum operator safety. For large dimension tooling, as used for tenoning and panel raising, the cutterblock can be
conveniently positioned below the table.

Optional equipment: an outrigger table can be added to your 2000 mm tenoning. With this valuable option you can easily work with large workpieces such as entrance doors for rebate operations.